This is the interior, which has a pattern that looks like carbon fiber. To tell the truth, I anticipated that it would be of high quality.

It was a pleasant surprise to find that I enjoy doing it. So, let me explain how to put it in place for you. It's just a piece of double-sided tape, but first I'll tell you how awesome it is, and then I'll try to convince you to make some adjustments to the inside of your vehicle along these lines. It has a cool appearance. It is very inexpensive, which in most cases indicates that there is a disadvantage and a slight disadvantage, but I will tell you how to get around it, so check it, OK, let's see what we have accomplished here. You are familiar with the pattern of carbon fiber, and although I believe they will overlap, it's possible that they won't; I'm not sure because I need to measure it first; however, the front edge of the space between them will be hidden by the screen. I certainly do.

Mode Sonnet Mounting Comparison Sound Test (SOTCs, Carbon Fiber Plate)

To tell you the truth, I have no idea how sharp it is. You should know that there will be a significant amount of glare on the windshield. I really have no idea. Learn the correct response here. OK, so I'll put the link here, but it will either take you to Amazon or the base. Due to the fact that I have a 2018, these are my patterns. So, let's try them out and see how it turns out, shall we? OK, so I want you to try to do some dry fitting here, carbon fiber sheet just to see how things are going and what I found first, because I think it will look really cool. To put it simply, it's slippery, and in comparison, it's even slipperier than this. Please check out my other content to take advantage of the discount code and other opportunities. Anyway, getting back to this gap, even though it will look like this behind the screen, you know what is good, good two or three millimeters, which is very important, you know, let's see what it looks like outside, you know, let's see what it looks like from the outside.

This thing is everywhere now, it's not really falling, but you can see, look here, you're sitting in the car, and you won't see this. The car you see, I mean, yes, especially there. Now remember, this thing is everywhere now; it's not really falling. This is what the screen will look like. In point of fact, this is it. But you know, I think I'll put something simpler than it there because it doesn't matter whether you have a carbon fiber pattern in the back or not. I think what I want to do is put it in the back a little, well, just darken it, because the wood is very light. I think what I want to do is put it in the back a little. So, what sort of black arts did I practice in order to create this electronic tape? Its gap is not large enough, so you will see a pattern. To prevent this, simply place some dark things in it. This will make the area less bright when viewed from that vantage point. To begin, thoroughly clean everything with the alcohol. Although I notice that the tape overlaps a little bit, I want to cut it off because if you have two of them, I'm practising sticking it, and I have to say that I'm a little nervous because I think once the tape touches, you know, this is the first thing I want to do. I'm practising sticking it, and I have to say that I'm a little nervous because I think once the tape touches, you know, this is the first thing I want to do

It's either going to be face up, or you're going to have to push it in. Start removing it by peeling it off. Give me a chance to see if I can pull it off.

I'm not entirely certain, but I believe that I've experienced the belt on that side seizing up because I'm trying to close the gap in the middle as much as is humanly possible. Things appear to be going swimmingly. You are correct, carbon fiber plate there is nothing that can be seen here from what I can tell. Any kind of wood or odd gap can be folded over here, which is why, particularly from this vantage point, I can't make out any genuine gap on the side. Now, let's figure out how to go about doing that. After it has become immobile and I have determined that it is in an advantageous position, I will lower the top. You are aware that I do not wish to press it down an excessive amount because you will see that it requires a great deal of movement.

My goal is to first get it into the correct position, then press it firmly into place, and finally ensure that it doesn't move around an excessive amount. To tell you the truth, I really don't want to stand up like this. So, let's start tearing this apart, shall we? Permit me to get through this anxiously. Okay, at this point all I have to do is slide my hand.

Alright, let's take a gander at it. It has a crisp appearance. That is to say, it goes down very easily.

I showed you another edge earlier; it's very good; there shouldn't be any interference from the door; there is sufficient space; you don't need to worry about anything; the only issue is that you need to look very carefully. This is a very positive development. No, no, this is not in any way beneficial. You are aware of this, and you should know that this item does not cost very much at all; the link to it is provided below. What's the worst thing that could happen? You will attach this item to it. You don't like it. Then you remove it after using a miniature hot-air gun to blow it dry and then pulling it out. It is very effective in sticking. Then, when you decide you no longer want it, you simply I don't even know what to do. It is possible that if you heat it, it will become somewhat sticky. Take it out immediately, because this will be the worst possible outcome. You can take it out, put it back, or leave it there for a little while. When I find something that I like, I tend to keep it around for a while. If I don't end up liking it, that's totally fine with me.

It will be replaced by me. This is a package for the vinyl record. I'll attach a link to the specific vinyl package you purchased. This is the one I put on the mirror; it's the same one.

It is obviously brand new, so you know, I really thought I would use this here because I thought it would be appropriate. I am conscious of the fact that the presentation of this record album looks cool. It appears to have more of a three-dimensional quality the closer you get to it or the further away you are from it. It is cool, but only when it is well illuminated; the interior lighting of your car is typically not very good. The only time it is cool is when it is well illuminated. I have noticed, and I really have noticed, that whenever it is even slightly dark in this location, it will vanish, and you will be unable to make out any patterns at all. If you are certain that what you are looking for is something lit, for example, you may have noticed that in one of my other pieces of content, I have a mirror cover and vinyl packaging. To put it simply, there is a significant contrast in appearance between this and that. carbon fiber sheet is clear that it is a standard piano black, which is what they refer to as piano gloss black; however, there is a significant difference between the two. Anyway, I'll just take this off and start wearing it, thanks anyway. Let me push it in here when I don't have it because that's what I'm going to do here. When you go too far, it will make it a little more difficult to arrange things, so what I'm doing is just putting everything on the way that I want to do it.